SVEX-PTZ-D1-Z Explosion Proof PTZ Camera Housing for Hazardous Environments
Certified Protection | 360° Pan-Tilt Range | Rugged Stainless Steel Housing The SVEX-PTZ-D1-Z Explosion Proof PTZ Camera Housing is a purpose-built enclosure designed to safeguard PTZ surveillance cameras operating in hazardous areas where flammable gases, vapors, or dusts are present. Engineered for full 360° pan-tilt control and harsh industrial conditions, this rugged housing supports reliable operation of internal camera components while delivering corrosion resistance, environmental sealing, and certified explosion protection.Certified Safety in Explosive Zones
Tested and approved for use in hazardous areas, the SVEX-PTZ-D1-Z is certified to Exd II C T6 Gb / DIP A20 TA, T6 standards, and conforms to CNEx13.3114 and Q/320412 ZAF046-2013 for use in:- Zone 1 & Zone 2 gas atmospheres
- Zone 21 & Zone 22 dust environments
Rugged Construction for Industrial Conditions
Built from 304 or 316L stainless steel, the SVEX-PTZ-D1-Z offers exceptional resistance to corrosion from salt spray, chemicals, and industrial contaminants. The unit features a sun shield to reduce heat and glare, and its construction is IP68-rated, protecting the internal camera from full dust ingress and long-term immersion in water. This level of durability makes it suitable for both indoor and outdoor installations, even in extreme environmental conditions.Full PTZ Support for Complete Surveillance Coverage
The SVEX-PTZ-D1-Z allows full 360° horizontal rotation and -90° to +90° vertical tilt, enabling complete area coverage for cameras mounted inside the enclosure. It offers a wide range of pan/tilt speeds, from 0.1° to 45° per second, and supports a full suite of PTZ functions:- Auto Cruise
- Auto Scan
- Cruise Scan & Keep Watch
- Resume Function after power loss
- Up to 300 programmable preset positions
Built to Withstand Harsh Environments
This explosion-proof PTZ housing is engineered for extreme conditions:- Operating Temperature: -25°C to +60°C
- Relative Humidity: ≤95% (non-condensing)
- Air Pressure: 80Kpa to 106Kpa
Reliable Power & Signal Transmission
The SVEX-PTZ-D1-Z is designed to support various industrial voltage inputs:- AC85V–AC265V
- DC24V
- AC24V
Easy Installation & Secure Cable Management
The housing comes with an integrated cable design and supports one G3/4″ or NPT3/4″ cable thread hole for secure, explosion-proof cabling. Mounting options include wall or pole configurations, with compact dimensions of 312 x 238 x 350 mm (12.3″ x 9.4″ x 13.8″) and a total weight of 23 kg (50.7 lbs.), ensuring a stable installation in any environment.Ideal Applications
The SVEX-PTZ-D1-Z Explosion Proof Housing is ideal for protecting PTZ surveillance cameras in:- Oil and gas refineries
- Chemical and petrochemical plants
- Offshore drilling platforms
- Explosive or fireworks manufacturing
- Grain silos and combustible dust zones
- Fuel storage and gas stations
Certifications & Standards: IECEx International Certification System · EU ATEX Directive 2014/34/EU
Explosion for Hazardous Locations
This explosion-proof explosion is engineered for hazardous locations where standard equipment cannot operate safely. Certified for Class I Division 1 and Division 2 environments, it meets ATEX and IECEx standards for oil & gas, chemical, mining, and offshore installations.
Explore the full Veilux range of explosion-proof security cameras for your industrial security requirements.