Total Cost of Ownership

Proprietary systems accumulate hidden costs over 10-15 years: licensing, proprietary replacement modules at 3x market rate, and VMS migration costs. Veilux housings accept standard camera modules from your existing supply chain, reducing 10-year system cost by 20-40% on large deployments.

Read lifecycle cost analysis →

Integration With Existing Camera Brands

Veilux housings are engineered and field-validated for Axis, Bosch, Hanwha, Sony, Pelco, and Avigilon. When classified area requirements arise, extend your existing VMS and camera platform into the hazardous zone — no platform migration, no retraining, no parallel support contracts. When a camera module fails, your team replaces it from your existing supply chain.

Customized Configurations

Veilux engineers configure custom housing sizes, window options (borosilicate, sapphire, polycarbonate), wiper and defogging systems, conduit layouts per NEC 502.10, 316L stainless for H2S and chloride environments, and hybrid PTZ/fixed camera enclosures. Custom requests reviewed within 24-48 hours; non-standard projects 2-4 weeks from design approval to manufacturing.

Full-Cycle Engineering Support

Veilux covers every project phase: area classification review (NEC/ATEX/IECEx), AHJ documentation packages, installation and conduit compliance guidance, and post-installation audit support per Veilux certification audit methodology. Provided directly by Veilux technical staff — not outsourced, not billed as professional services.

Oil & Gas Refinery

Refinery CCTV Expansion Into Class I Division 1 Process Areas

A Gulf Coast petroleum refinery operating a 400-camera Axis network needed to extend coverage into Class I Division 1 crude unit and fluid catalytic cracking areas. Replacing the camera platform would have required VMS reconfiguration, new operator training, and parallel support contracts — an 18-month program estimated at $2.1M.

Solution: Veilux Class I Division 1 stainless steel housings configured for Axis camera modules, integrated directly into the existing VMS. 47 new camera positions deployed. No VMS migration. No platform retraining. Area classification review and AHJ pre-submission documentation package provided by Veilux engineering.

Offshore Platform

ATEX Zone 1 Housing Replacement With Legacy Camera Retention

An offshore operator with ATEX Zone 1 and Zone 2 classified areas needed to replace salt spray-corroded explosion-proof housings while retaining functional Sony camera modules and fiber optic network infrastructure.

Solution: Veilux ATEX Zone 1 certified 316L stainless housings configured for Sony module dimensions, with custom conduit entry layouts to match existing conduit runs. Camera modules transferred during a planned shutdown. No camera replacement. No network reconfiguration. Project scope: housing replacement and re-certification only.

Chemical Manufacturing

Chemical Plant Greenfield With Enterprise Camera Standardization

A specialty chemical manufacturer building a new Class I Division 1 and Division 2 production facility had standardized on Hanwha Vision cameras across other sites. No Hanwha explosion-proof housing existed at the required certification level.

Solution: Veilux ATEX Zone 1 and IECEx certified housings configured for Hanwha camera modules, with complete certification documentation for AHJ submittal. Facility launched on the Hanwha VMS already running enterprise-wide — no additional camera platform integration required.

Is Veilux cheaper than other explosion-proof camera suppliers?

Veilux is priced competitively, but the more relevant measure is total cost of ownership. Veilux housings accept cameras from major brands your team already knows — eliminating duplicate vendor training, separate support contracts, and rip-and-replace upgrades. Facilities that deploy Veilux certified housings with their preferred camera platforms typically see 20-40% lower system lifecycle cost compared to single-source proprietary solutions. The correct comparison is not acquisition price; it is the cost of owning and operating the system across a 10-15 year asset life.

Can Veilux integrate explosion-proof housings with cameras I already own?

Yes. Veilux explosion-proof housings are engineered to accommodate cameras from Axis, Bosch, Hanwha, Sony, Pelco, Avigilon, and other major manufacturers. If your site runs a standardized VMS platform tied to a specific camera brand, Veilux provides the certified Class I Division 1 or ATEX Zone 1 enclosure without forcing a camera brand change. Integration is validated by Veilux engineers before delivery. For non-standard configurations, contact Veilux engineering with the camera model and installation parameters.

Do I need to replace my entire surveillance system to add explosion-proof protection?

No. Veilux specializes in retrofit and hybrid deployments. Existing cameras in safe areas can remain unchanged while Veilux certified housings extend protection into newly classified or upgraded hazardous zones. This protects prior capital investment and minimizes installation downtime. For facilities conducting ATEX reclassification or NEC area classification updates that expand classified boundaries, Veilux retrofit housings allow compliant camera deployment without infrastructure replacement. See our retrofit camera guide for detailed guidance.

What industries does Veilux serve?

Veilux supplies explosion-proof cameras, housings, lighting, and accessories to oil and gas refineries, offshore platforms, chemical processing plants, mining operations, pharmaceutical manufacturing facilities, grain handling operations, LNG terminals, wastewater treatment plants, and utility substations — any site with NEC Class I, II, or III Division 1 or 2 areas, or ATEX/IECEx Zone 0, 1, or 2 classifications. For industry-specific requirements, see the oil and gas guide, chemical plant guide, offshore guide, and pharmaceutical guide.

What camera brands can Veilux explosion-proof housings accommodate?

Veilux housings are designed and field-validated for camera modules from Axis Communications, Bosch Security, Hanwha Vision, Sony, Pelco, Avigilon, and other industry-standard manufacturers. For camera models not on the standard validated list, Veilux engineers review camera dimensions, cable configuration, and thermal profile and confirm compatibility — typically within 48 hours. Custom mounting hardware is available for non-standard configurations at no additional charge for project orders.

Does Veilux provide engineering support for hazardous area compliance?

Yes. Veilux engineering support covers NEC area classification review, ATEX and IECEx certification guidance, system design for Class I Division 1 through Class III Division 2 locations, camera and housing selection matched to specific hazard groups and temperature classes, and pre-submission documentation review for AHJ approvals. Support is provided directly by Veilux technical staff — not outsourced or routed through a reseller. For a summary of classification standards, see our hazardous location classification guide.