Explosion-proof systems from Veilux are engineered for the most demanding hazardous environments, certified for Class I Division 1 and Zone 1 areas. Our explosion-proof lineup meets ATEX, IECEx, and UL standards.
Bosch Cameras in Hazardous Classified Areas
Explosion-proof for Hazardous Locations
Bosch Security Systems produces the FLEXIDOME, DINION, and AUTODOME camera lines — widely deployed in industrial, infrastructure, and commercial facilities. Standard Bosch cameras are not rated for Class I Division 1, Class II, or ATEX Zone 1 explosive atmospheres. System integrators working in oil refineries, chemical plants, and grain facilities use Veilux explosion-proof housings to bring Bosch camera capability into these environments while maintaining ATEX and IECEx certification compliance.
Compatible Bosch Camera Models
Bosch box-style cameras with CS-mount lens compatibility are the best candidates for Veilux explosion-proof housing integration.
| Model | Resolution | Sensor | Lens Mount | Operating Temp | Recommended Veilux Housing |
|---|---|---|---|---|---|
| DINION IP starlight 7000i (NBE-7702-AL) | 1080p Full HD | 1/2.8″ CMOS | CS-mount | -40°C to +65°C | Veilux Explosion-Proof Box Housing |
| DINION IP ultra 8000 MP (NBE-8502-AL) | 5MP / 8MP | 1/2.8″ CMOS | CS-mount | -40°C to +65°C | Veilux Explosion-Proof Box Housing |
| FLEXIDOME IP micro 5100i (NIN-51022-V3) | 2MP Full HD | 1/2.8″ CMOS | Varifocal integral | -30°C to +50°C | Veilux Compact Dome Housing |
| DINION IP 3000i (NBE-3503-AL) | 2MP Full HD | 1/2.8″ CMOS | CS-mount | -40°C to +65°C | Veilux Explosion-Proof Box Housing |
| FLEXIDOME IP starlight 8000i (NIN-83013-A3A) | 2MP Full HD | 1/2.8″ CMOS | CS-mount | -40°C to +65°C | Veilux Explosion-Proof Box Housing |
Integration Process
The Bosch DINION series box cameras are the most straightforward for Veilux housing integration due to their standard rectangular body and CS-mount lens. The camera mounts on the Veilux housing’s internal tray, the lens is threaded through the borosilicate glass window port, and PoE or 24VAC power enters via an explosion-proof conduit seal.
Key Installation Requirements
- Lens selection: Choose a CS-mount varifocal lens (2.8–12mm typical) to match site field-of-view requirements before housing installation
- Bosch Video Management System (BVMS): Compatible through Bosch ONVIF support — cameras inside Veilux housings are managed identically to standard Bosch deployments
- IP rating: Veilux housings provide IP66/IP67 protection — the Bosch camera inside does not need its own outdoor IP rating
- Conduit sealing: All cable penetrations sealed with EYS fittings per NEC Article 501 for Class I Division 1 installations
Bosch AUTODOME PTZ Integration
For pan-tilt-zoom applications, Bosch AUTODOME camera modules (the internal mechanism without the outer dome housing) can be installed in Veilux explosion-proof PTZ housings. The Veilux PTZ housing provides 360° pan, 90° tilt, and explosion-proof enclosure, while the Bosch AUTODOME module supplies the imaging capability. Contact Veilux for AUTODOME PTZ housing integration specifications.
Frequently Asked Questions
- Can I use Bosch Video Management System (BVMS) with Veilux-housed Bosch cameras?
- Yes. Bosch BVMS, Bosch Video Client, and any ONVIF Profile S or Profile T compliant VMS will recognize the Bosch camera inside a Veilux housing. The housing is transparent to the camera’s network identity and management interface.
- Which Bosch cameras are NOT compatible with Veilux explosion-proof housings?
- Bosch dome and bullet cameras with integrated molded enclosures cannot be separated from their outer housing and are not suitable for third-party housing integration. Only box-style cameras with separate lens mounts (DINION series, FLEXIDOME micro) are compatible.
- What is the lead time for a Veilux housing pre-configured for a Bosch DINION camera?
- Standard Veilux explosion-proof housings ship within 2–4 weeks. Pre-configured assemblies with Bosch DINION cameras installed and tested typically require 4–6 weeks. Contact Veilux for exact lead times for your application.
Specify Bosch cameras for your hazardous-area project using Veilux certified housings. View our explosion-proof housing range or request a custom integration quote.
Further Reading
- Explosion-Proof Camera Housing Selection Guide
- Explosion-Proof Camera Network Architecture and VLAN Guide
- Explosion-Proof Camera Selection Guide
- Browse Explosion-Proof Camera Housings
- Request a Project Quote
For regulatory standards on explosion-proof, refer to the OSHA hazardous location standards and NFPA 70 National Electrical Code.
All equipment in this category meets the rigorous safety requirements for classified hazardous locations. Independent certification to ATEX, IECEx, and UL standards verifies that each unit has been tested for use in explosive atmospheres found in petrochemical facilities, offshore platforms, grain handling operations, and chemical processing plants. These certifications are renewed on a defined schedule to reflect any design changes and to maintain compliance with evolving international standards.
Proper product selection depends on your site classification, mounting requirements, and operating environment. Class I Division 1 and Zone 1 environments demand the highest level of enclosure protection, while Division 2 and Zone 2 locations may permit designs with a lower protection level. Working with a certified hazardous-area specialist before finalising your specification helps ensure the installation meets both local electrical codes and applicable international standards without over-specifying the hardware.
Professional installation is strongly recommended for all hazardous-area equipment. Installers experienced with NEC Article 500 and IEC 60079 can verify that cable entries, conduit seals, and grounding connections are completed correctly and documented for compliance records. Veilux supplies full technical documentation, certified installation drawings, wiring diagrams, and post-installation support for every product in our catalog at no additional charge.
Routine inspection and preventive maintenance extend service life and preserve explosion-proof certifications. Key inspection points include housing integrity, cable gland condition, lens or cover glass condition, and confirmation that all enclosure fasteners meet published torque specifications. Veilux can assist with scheduled maintenance programs tailored to your facility type, operating cycle, and regulatory requirements, helping reduce unplanned downtime and extend the useful life of each installed unit.
Custom configurations are available for non-standard mounting geometries, extreme temperature ranges, or unique area classifications. Veilux engineers work directly with facility managers, EHS officers, and project engineers to develop solutions that meet both performance targets and compliance obligations. Contact our technical team to discuss your specific project requirements and receive a detailed equipment proposal, including complete bill of materials and compliance documentation for your approval process.
All equipment in this category meets the rigorous safety requirements for classified hazardous locations. Independent certification to ATEX, IECEx, and UL standards verifies that each unit has been tested for use in explosive atmospheres found in petrochemical facilities, offshore platforms, grain handling operations, and chemical processing plants. These certifications are renewed on a defined schedule to reflect any design changes and to maintain compliance with evolving international standards.
Proper product selection depends on your site classification, mounting requirements, and operating environment. Class I Division 1 and Zone 1 environments demand the highest level of enclosure protection, while Division 2 and Zone 2 locations may permit designs with a lower protection level. Working with a certified hazardous-area specialist before finalising your specification helps ensure the installation meets both local electrical codes and applicable international standards without over-specifying the hardware.