Explosion-proof camera systems from Veilux are engineered for the most demanding hazardous environments, certified for Class I Division 1 and Zone 1 areas. Our explosion-proof camera lineup meets ATEX, IECEx, and UL standards.
Contact Us
Explosion-proof camera for Hazardous Locations
Call or Send us a Message
Open: Monday-Friday 8am-5pm (CST)
Address: 802 Greenview Dr. Ste. 200 Grand Prairie, TX, 75050
Email:Â sales@veilux.net
Phone: (214) 635-4855
E-mail addresses:
Sales  |  sales@veilux.net
Marketing | marketing@veilux.net
Technical Assistance | 1-214-635-4855
Technical Support  |  support@veilux.net
Europe | eusupport@veilux.net Â
Middle-East and Africa | mesupport@veilux.net
All Other Countries |Â intTechSupport@veilux.net
Send us a Message
Send us your questions or comments
Please fill out the form and a member of our staff will contact you as soon as possible. We work 8-5 CST Monday through Friday, so please allow 24 hours for a response, but otherwise we will get to your message as soon as possible.
Grand Prairie
- Open : Monday-Friday 8am-5pm (CST)
- 802 Greenview dr. ste. 100 grand prairie, tx. 75050.
- sales@veilux.net
- Local: (214) 635-4855
Egypt
- Open : Monday-Friday 8am-5pm (CST)
- Address : 142 Shubra st. p.o. box 11672, cairo, egypt
- sales@veilux.net
- (214) 635-4855
Jordan
- Contact Nour Ramzy Zaki
- +20 12 03500359
Related Resources
- Browse Explosion-Proof Cameras
- Browse Explosion-Proof Lighting
- Request a Project Quote
- Explosion-Proof Camera Selection Guide
All equipment in this category meets the rigorous safety requirements for classified hazardous locations. Independent certification to ATEX, IECEx, and UL standards verifies that each unit has been tested for use in explosive atmospheres found in petrochemical facilities, offshore platforms, grain handling operations, and chemical processing plants. These certifications are renewed on a defined schedule to reflect any design changes and to maintain compliance with evolving international standards.
Proper product selection depends on your site classification, mounting requirements, and operating environment. Class I Division 1 and Zone 1 environments demand the highest level of enclosure protection, while Division 2 and Zone 2 locations may permit designs with a lower protection level. Working with a certified hazardous-area specialist before finalising your specification helps ensure the installation meets both local electrical codes and applicable international standards without over-specifying the hardware.
Professional installation is strongly recommended for all hazardous-area equipment. Installers experienced with NEC Article 500 and IEC 60079 can verify that cable entries, conduit seals, and grounding connections are completed correctly and documented for compliance records. Veilux supplies full technical documentation, certified installation drawings, wiring diagrams, and post-installation support for every product in our catalog at no additional charge.
Routine inspection and preventive maintenance extend service life and preserve explosion-proof certifications. Key inspection points include housing integrity, cable gland condition, lens or cover glass condition, and confirmation that all enclosure fasteners meet published torque specifications. Veilux can assist with scheduled maintenance programs tailored to your facility type, operating cycle, and regulatory requirements, helping reduce unplanned downtime and extend the useful life of each installed unit.
Custom configurations are available for non-standard mounting geometries, extreme temperature ranges, or unique area classifications. Veilux engineers work directly with facility managers, EHS officers, and project engineers to develop solutions that meet both performance targets and compliance obligations. Contact our technical team to discuss your specific project requirements and receive a detailed equipment proposal, including complete bill of materials and compliance documentation for your approval process.
All equipment in this category meets the rigorous safety requirements for classified hazardous locations. Independent certification to ATEX, IECEx, and UL standards verifies that each unit has been tested for use in explosive atmospheres found in petrochemical facilities, offshore platforms, grain handling operations, and chemical processing plants. These certifications are renewed on a defined schedule to reflect any design changes and to maintain compliance with evolving international standards.
Proper product selection depends on your site classification, mounting requirements, and operating environment. Class I Division 1 and Zone 1 environments demand the highest level of enclosure protection, while Division 2 and Zone 2 locations may permit designs with a lower protection level. Working with a certified hazardous-area specialist before finalising your specification helps ensure the installation meets both local electrical codes and applicable international standards without over-specifying the hardware.
Professional installation is strongly recommended for all hazardous-area equipment. Installers experienced with NEC Article 500 and IEC 60079 can verify that cable entries, conduit seals, and grounding connections are completed correctly and documented for compliance records. Veilux supplies full technical documentation, certified installation drawings, wiring diagrams, and post-installation support for every product in our catalog at no additional charge.
Routine inspection and preventive maintenance extend service life and preserve explosion-proof certifications. Key inspection points include housing integrity, cable gland condition, lens or cover glass condition, and confirmation that all enclosure fasteners meet published torque specifications. Veilux can assist with scheduled maintenance programs tailored to your facility type, operating cycle, and regulatory requirements, helping reduce unplanned downtime and extend the useful life of each installed unit.
Custom configurations are available for non-standard mounting geometries, extreme temperature ranges, or unique area classifications. Veilux engineers work directly with facility managers, EHS officers, and project engineers to develop solutions that meet both performance targets and compliance obligations. Contact our technical team to discuss your specific project requirements and receive a detailed equipment proposal, including complete bill of materials and compliance documentation for your approval process.