SVEX-TH125B Explosion-Proof Thermal Camera Housing

Explosion-proof for Hazardous Industrial Areas

Explosion-proof for Hazardous Locations

This explosion-proof is ATEX and IECEx certified for Class I Division 1 and Zone 1 hazardous locations including oil and gas refineries, chemical plants, and offshore platforms. Designed to contain any internal ignition and prevent it from igniting surrounding flammable atmospheres.

SVEX-TH125B Explosion-Proof Fixed Thermal Camera Housing for Hazardous Environments

The SVEX-TH125B Explosion-Proof Thermal Camera Housing is a robust, high-safety enclosure engineered to protect sensitive thermal imaging equipment in areas where explosive gases or combustible dusts may be present. Built from corrosion-resistant 316L stainless steel and certified for both ATEX and IECEx hazardous locations, this housing ensures that your thermal cameras operate securely and reliably under the harshest industrial conditions.

Certified Safety in Hazardous Zones

The SVEX-TH125B meets Ex db IIC T6 Gb / Ex tb IIIC T80°C Db explosion-proof standards, making it fully certified for:

• Gas Zones 1 and 2 – Environments with potentially explosive gases Dust Zones 21 and 22 – Locations with combustible dust particles

The rugged 316L stainless steel body provides exceptional resistance against saltwater, chemicals, and corrosive industrial atmospheres. Optional electro-polished or anti-corrosion coatings offer even greater durability for offshore, marine, or chemical processing sites. With IP68 ingress protection, the housing is fully dust-tight and waterproof, capable of withstanding immersion in water for extended periods. This ensures maximum protection against environmental factors, guaranteeing camera integrity in any weather or operational condition.

Optimized for Thermal Imaging Performance

This explosion-proof enclosure is specifically designed to house fixed thermal imaging cameras without compromising performance. Its precision-engineered Germanium or Zinc Selenide (ZnSe) front window allows thermal radiation to pass through without distortion, ensuring clear, accurate infrared imagery. Key design considerations include:

• Anti-reflective coated IR window to minimize optical loss
• Sealed lens assembly for contamination prevention
• Internal vibration isolation to maintain calibration accuracy
• Optional sunshield to reduce heat load in outdoor installations

Whether used for early fire detection, process monitoring, or security, the SVEX-TH125B provides the optimal protective environment for your thermal imaging system.

Flexible Installation and Integration

The SVEX-TH125B supports wall, ceiling, or pole mounting, making it adaptable to a wide range of industrial setups. The internal mounting bracket allows easy alignment of the camera, while the external cable glands provide secure, explosion-proof cable entry for power and data connections. Cable entry options support both standard Ethernet and fiber optic connectivity, ensuring compatibility with high-speed industrial networks.

Ideal Applications

This explosion-proof thermal camera housing is a reliable choice for:

• Oil & gas facilities – Leak detection, flare monitoring, hot spot detection
• Chemical plants – Process safety monitoring and incident prevention
• Offshore platforms – 24/7 thermal surveillance in marine environments
• Grain silos and mills – Early detection of smoldering fires in dust zones
• Power plants – Monitoring equipment temperatures for maintenance and safety

By combining thermal imaging technology with explosion-proof protection, operators can maintain continuous, real-time safety monitoring in the most dangerous environments.

Why Choose the SVEX-TH125B?

When operating in hazardous zones, the consequences of equipment failure can be severe. The SVEX-TH125B eliminates these risks by combining certified explosion protection with a design optimized for thermal imaging cameras. Its stainless steel construction, weatherproof sealing, and optical clarity make it the trusted solution for industrial safety and surveillance. Note: This is a special order item. It may take 4-6 weeks for delivery

Certifications & Standards: IECEx International Certification System · EU ATEX Directive 2014/34/EU

Explosion for Hazardous Locations

This explosion-proof explosion is engineered for hazardous locations where standard equipment cannot operate safely. Certified for Class I Division 1 and Division 2 environments, it meets ATEX and IECEx standards for oil & gas, chemical, mining, and offshore installations.

Explore the full Veilux range of explosion-proof security cameras for your industrial security requirements.

Key Features

• Certified explosion-proof for Zone 1 / Class I Division 1 environments
• ATEX, IECEx, and UL listed explosion-proof for global compliance
• Rugged industrial-grade construction for harsh environments
• Wide operating temperature range for extreme conditions

For technical specifications, certifications, and pricing on this explosion-proof, browse the full Veilux explosion-proof product range or contact our hazardous area specialists.

All equipment in this category meets the rigorous safety requirements for classified hazardous locations. Independent certification to ATEX, IECEx, and UL standards verifies that each unit has been tested for use in explosive atmospheres found in petrochemical facilities, offshore platforms, grain handling operations, and chemical processing plants. These certifications are renewed on a defined schedule to reflect any design changes and to maintain compliance with evolving international standards.

Proper product selection depends on your site classification, mounting requirements, and operating environment. Class I Division 1 and Zone 1 environments demand the highest level of enclosure protection, while Division 2 and Zone 2 locations may permit designs with a lower protection level. Working with a certified hazardous-area specialist before finalising your specification helps ensure the installation meets both local electrical codes and applicable international standards without over-specifying the hardware.

All equipment in this category meets the rigorous safety requirements for classified hazardous locations. Independent certification to ATEX, IECEx, and UL standards verifies that each unit has been tested for use in explosive atmospheres found in petrochemical facilities, offshore platforms, grain handling operations, and chemical processing plants. These certifications are renewed on a defined schedule to reflect any design changes and to maintain compliance with evolving international standards.