Explosion-proof camera system certified for Class I Division 1 and Zone 1 hazardous locations.
CCTV System Calculators
💾 CCTV Storage Calculator
Explosion-proof camera system for Hazardous Locations
Enter your camera specifications and recording requirements. Results update automatically.
Per-Camera Breakdown
Total Storage Required
Recommended Drive Count
Estimates use constant bitrate (CBR) encoding. Actual storage varies with scene motion, lighting, and encoder settings. Motion-triggered recording reduces storage by 30-60%. Includes 5% system overhead for NVR OS and software. Drive counts assume 1 TB = 1,000 GB usable.
📡 IP Camera Bandwidth Calculator
Estimate the total network bandwidth required for your IP camera system.
Bandwidth Requirements
* Estimates based on typical CBR bitrates. Actual bandwidth varies with scene activity, lighting changes, and encoder settings. Add 20% overhead for network management traffic and allow for burst peaks up to 1.5x the calculated value.
Related Resources
- Explosion-Proof Camera Coverage Planning Guide
- Explosion-Proof Camera Lens Selection Guide
- Explosion-Proof Camera Network Architecture and VLAN Guide
- How to Design a Hazardous Area CCTV System
- Browse Explosion-Proof Cameras
For regulatory standards on explosion-proof camera system, refer to the OSHA hazardous location standards and NFPA 70 National Electrical Code.
As a leading provider of explosion-proof camera system solutions, Veilux delivers certified equipment built for hazardous environments. Our explosion-proof camera system lineup is ATEX, IECEx, and UL listed for Class I Division 1 and Zone 1 applications.
Every explosion-proof camera system unit undergoes rigorous testing to ensure reliable operation in explosive atmospheres.
All equipment in this category meets the rigorous safety requirements for classified hazardous locations. Independent certification to ATEX, IECEx, and UL standards verifies that each unit has been tested for use in explosive atmospheres found in petrochemical facilities, offshore platforms, grain handling operations, and chemical processing plants. These certifications are renewed on a defined schedule to reflect any design changes and to maintain compliance with evolving international standards.
Proper product selection depends on your site classification, mounting requirements, and operating environment. Class I Division 1 and Zone 1 environments demand the highest level of enclosure protection, while Division 2 and Zone 2 locations may permit designs with a lower protection level. Working with a certified hazardous-area specialist before finalising your specification helps ensure the installation meets both local electrical codes and applicable international standards without over-specifying the hardware.
Professional installation is strongly recommended for all hazardous-area equipment. Installers experienced with NEC Article 500 and IEC 60079 can verify that cable entries, conduit seals, and grounding connections are completed correctly and documented for compliance records. Veilux supplies full technical documentation, certified installation drawings, wiring diagrams, and post-installation support for every product in our catalog at no additional charge.
Routine inspection and preventive maintenance extend service life and preserve explosion-proof certifications. Key inspection points include housing integrity, cable gland condition, lens or cover glass condition, and confirmation that all enclosure fasteners meet published torque specifications. Veilux can assist with scheduled maintenance programs tailored to your facility type, operating cycle, and regulatory requirements, helping reduce unplanned downtime and extend the useful life of each installed unit.
Custom configurations are available for non-standard mounting geometries, extreme temperature ranges, or unique area classifications. Veilux engineers work directly with facility managers, EHS officers, and project engineers to develop solutions that meet both performance targets and compliance obligations. Contact our technical team to discuss your specific project requirements and receive a detailed equipment proposal, including complete bill of materials and compliance documentation for your approval process.
All equipment in this category meets the rigorous safety requirements for classified hazardous locations. Independent certification to ATEX, IECEx, and UL standards verifies that each unit has been tested for use in explosive atmospheres found in petrochemical facilities, offshore platforms, grain handling operations, and chemical processing plants. These certifications are renewed on a defined schedule to reflect any design changes and to maintain compliance with evolving international standards.